11 Reasons Why CableShade Canopies Are Superior
1. Durable, Long-Lasting Canopies with No Sewn Joints, No Stitching
The CableShade system has no sewn joints. Rather, each crossbar is fitted with a high-grade vinyl cover, pressure-fitting the fabric onto the crossbar and using aluminum rivets so the fabric can never come loose in high winds. Other retractable cable/wire canopy systems sew a pocket about every two feet to run a crossbar or use sewn-in grommets and eyelets—both of which unravel over time with the whipping of the winds and constant exposure to hot/cold weather.
2. Stainless-Steel Components
The eyelets on the CableShade system, where the cable glides, are stainless steel for longevity. We also use a 3/16 stainless steel cable to run each canopy and a stainless-steel turnbuckle for easy adjusting the tension of each cable—another long-lasting feature.
3. Only Top-Grade Fabrics Used
Our CableShades are always made from top-grade fabrics—Sunbrella, Tempotest, or Sauleda awning/marine fabrics, and Textilene or Awntex mesh fabrics (all with 10-year warranty). Many online canopy retailers use a very cheap mesh fabric that only carries a 3-year warranty and dries/cracks/tears within only a few years.
4. Easier Winter Maintenance
With the CableShade system, winter maintenance is straightforward. You can either unclip the canopies in minutes, roll them up, and store them away until spring, or simply leave them up and put a simple wrap around the fabric to protect it from snow and ice. This ensures the fabric can last years beyond its warranty.
5. Most Available Fabric Colors and Designs
CableShade canopies can be made in Sunbrella, Tempotest, Sauleda, Awntex, Textiline, and Outdura colors, designs, and sizes. When designing your custom canopy shade solution, you have many outdoor waterproof fabrics to choose from. Visit our fabric page for more information.
6. Easy, Self-Locking System—No Ladder Needed. Retracts in Seconds.
Our CableShade system includes a unique self-locking mechanism for extending the canopies into the shade position. Other systems use a latch requiring a ladder when the canopies are mounted higher than reach. This self-locking feature is for both shade (extended) position and lock back when retracted.
7. Custom Made to Ensure Top Quality and Fit
The CableShade awning/canopy is not a cookie-cutter or mass-produced product. Each order is custom-crafted and made by the owner/designer to fit your pergola. This ensures quality over quantity.
8. Most Durable System for High Winds
Because of their unique design, the CableShade design allows the canopies to be left in a shade position during high winds. Other systems require the canopies to be retracted in even medium winds. With our design, the cables are not mounted 'above' the fabric but 'to the sides' of the fabric—therefore, when the wind blows, the fabric doesn't whip up and wear holes against the cables. It is the most common mistake of all other manufacturers of cable-shade systems.
9. No Roll-Up Ensures Longer Lasting Fabric/Easy Dry-Out
The CableShades gather (retract) in accordion style, allowing a breezeway to keep the fabric dry. This extends the life of your canopy/awning for 15+ years. With other systems (the crank-out styles), the fabric rolls up on a spindle. If the fabric is wet, mildew and fabric rot ensue.
10. Does Not Require Regular Service or Maintenance
The CableShade system has no rollers or automated moving parts; therefore, no regular service is required.
11. Quick and Easy Order and Installation
Installation can take as little as 30 minutes per canopy on an existing pergola or trellis. Most orders can be shipped within 10 days of ordering.